Spectracom SecureSync User Reference Manual page 103

2.
3.
3.3.7.2 Configuring SNMP V1/V2 Communities
Creating Communities
1.
2.
3.
CHAPTER •
3 SecureSync User Reference Guide Rev. 18
SNMP Traps Settings Screen. See "Defining SNMP Traps (Notifications)" on
page 91.
The Actions panel , which contains the Restore Default SNMP Configuration button.
The SNMP Status panel , which offers:
An SNMP ON/OFF switch.
An Authentication Error Trap ON/OFF switch.
SysObjID —The System Object ID number. This is editable in the SNMP Status
panel (see "Configuring SNMP Status Settings" on page 93).
Contact Information —The email to contact for service. This is editable in the SNMP
Status panel (see "Configuring SNMP Status Settings" on page 93).
Location —The system location. This is editable in the SNMP Status panel (see
"Configuring SNMP Status Settings" on page 93).
Description —A simple product description. This is not editable in the SNMP Status.
Navigate to the MANAGEMENT/NETWORK/SNMP Setup screen.
In the SNMP V1/V2 panel click the PLUS icon in the top-right corner.
The SNMP V1/V2c Settings for Access window will display.
3.3 NETWORK Setup Pages
87