Issuing Halt Command Via Keypad/Serialport/Telnet/Sss; Rebooting The System - Spectracom SecureSync User Reference Manual

3.10 Rebooting the System
Once the HALT process has been initiated, the front panel LCD will display Power off
SecureSync , and the front panel LED time display will stop incrementing.
3.9.2

Issuing HALT Command via Keypad/SerialPort/Telnet/SSS

The HALT command can be initiated not only via the SecureSync Web UI, but also via the keypad
and LCD display. Refer to "Using the Keypad and Information Display" on page 28 for information
on using the keypad to perform a HALT.
With a serial connection to the front panel serial port, telnet connection or SSH connection, type
<Enter> to halt SecureSync for shutdown. For more information on SecureSync com-
halt
mands, see "CLI Commands" on page 457.
Once the HALT process has been initiated, the front panel LCD will display Power off
SecureSync , and the front panel LED time display will stop incrementing.
3.10

Rebooting the System

To reboot SecureSync:
1.
From the TOOLS drop-down menu choose SYSTEM/Reboot/Halt .
2.
Select the Restart after Shutdown box in the Reboot/Halt window.
224
NOTE – Wait 30 seconds after entering the HALT command before removing power.
CHAPTER •
3 SecureSync User Reference Guide Rev. 18