Spectracom SecureSync User Reference Manual page 152

3.6 OTHER Setup Pages
To add a user account:
1.
Enter a Username . The user name can be any combination of lower-case characters only
(lower-case only; no upper-case characters, punctuation symbols and numbers are not
allowed). Minimum length = 3 characters, maximum length = 32 characters.
2.
Enter a Password . The password can be any combination of upper- and lower-case char-
acters. Minimum password length = 8 characters, maximum length = 32 characters.
3.
Repeat the new Password .
4.
In the Group field, choose the permission group to which you want the user to belong to:
There are two available permission groups for each user account:
permission level assigns permission to access and change all settings, with the exception
of the following capabilities, which are limited to the
To
change
136
Changing network settings
Adding and deleting user accounts
Upgrading SecureSync system software
Resetting the SecureSync configuration
Clearing log files
Changing Disciplining Setup options
Changing configuration options for the following protocols or features:
NTP
HTTPS, SSH
LDAP/RADIUS
SNMP (with the exception of configuring SNMP notifications).
an existing user account:
admin permission level only.
CHAPTER •
3 SecureSync User Reference Guide Rev. 18
user and admin . The user