Verifying The Validity Of An Input Signal; Time And Frequency Option Cards - Spectracom SecureSync User Reference Manual

5.2 Time and Frequency Option Cards
ENABLED (green); or
DISABLED (orange)
The current state of an
VALID (in green); or
INVALID (in red)
The Status Summary panel will be refreshed automatically every 30 seconds. Click the Refresh
button (circling arrows) on the right to refresh the status instantaneously. A slight refreshment
delay is normal (the duration depends on the configuration of your system.)
5.1.8

Verifying the Validity of an Input Signal

The HOME Page of the SecureSync Web UI provides quick access to the status of all inputs via
its Reference Status panel.
If an INPUT is
will be " Not Valid " (orange).
If an INPUT is
turn " Valid
5.2

Time and Frequency Option Cards

This section contains technical information and Web UI procedures relevant to SecureSync option
cards designed to deliver time and frequency signals.
292
input signal is indicated as:
, or
not present not valid, and qualified
, and the signal is considered
present
" (Green).
, the 1PPS Validity and Time Validity fields
valid, and qualified
CHAPTER •
5 SecureSync User Reference Guide Rev. 18
, the two indicators will then