Displaying Individual Logs - Spectracom SecureSync User Reference Manual

A green indicator lamp shows if events of the corresponding log category are stored remotely or loc-
ally.
The Logs Actions panel
The Actions panel on the upper-left corner of the Logs screen allows you to perform batch actions
on your logs:
The Remote Log Server panel
The Remote Log Server panel, which is where you set up and manage logs on one or more
remote locations. See also: "Setting up a Remote Log Server" on page 268.
4.11.4

Displaying Individual Logs

Next to displaying a Logs overview (see "The Logs Screen" on the previous page), it is also pos-
sible to access individual SecureSync logs:
1.
CHAPTER •
4 SecureSync User Reference Guide Rev. 18
To read a log, click the corresponding INFO button.
To configure a log, click the corresponding PENCIL button.
To clear a log, click the X-button.
NOTE – The Clear File
and stored in a Syslog server.
Save and Download All Logs —Save and download all the logs on SecureSync. See also:
"Saving and Downloading Logs" on page 263.
Clear All Logs —Clear all the logs on SecureSync. See also: "Clearing Logs" on page 272.
Restore Configuration —Restore all log configurations to their factory settings. See also:
"Restoring Log Configurations" on page 271.
From the TOOLS drop-down menu, select the desired Logs category (for example,
"Alarms", or "Events") from the right-hand column.
feature does not delete any of the logs that have been sent to
4.11 Logs
261