Spectracom SecureSync User Reference Manual page 162

3.6 OTHER Setup Pages
For each RADIUS server, the following information will display:
Actions —Click the X-button to remove a server.
3.6.4.4 Removing a RADIUS Server
To remove a RADIUS server:
146
Host —The hostname or IP address of the RADIUS server.
Port —The RADIUS port used to access the RADIUS server.
Timeout —The timeout that has been set for the RADIUS server.
Status —One of the following statuses will display:
UNREACHABLE (red, blinking)—The server is not available on the network.
UNAUTHORIZED (red)—The server is available on the network but access
was denied.
REACHABLE (green)—The server is available on the network and access
was allowed.
DISABLED (yellow)—The server is available on the network but RADIUS
authentication is disabled on the server.
CHAPTER •
3 SecureSync User Reference Guide Rev. 18