Spectracom SecureSync User Reference Manual page 107

3.3.7.4 Defining SNMP Traps (Notifications)
1.
2.
3.
4.
CHAPTER •
3 SecureSync User Reference Guide Rev. 18
Navigate to the MANAGEMENT/NETWORK/SNMP Setup screen.
In the SNMP Traps panel, click the PLUS icon in the top-right corner.
The SNMP Traps Settings window will display.
Enter the required information in the fields provided. (Note that the options available for edit-
ing will vary contexturally according to the users's choice in the Version field.)
The Version field provides a choice between v1, v2c and v3 (the default)
SNMP User names should be between 4 and 32 characters in length.
Destination IP Version is a choice between IPv4 and IPv6.
Destination IP is destination address for the notification to be sent. The default Port
is 162.
Engine Id must be a hexadecimal number (such as 0x1234).
Auth Type provides a choice between MD5 (the default) and SHA.
The Auth Password must be between 8 and 32 characters in length.
The Priv Type field provides a choice between AES and DES.
The Priv Passphrase must be between 8 and 32 characters in length.
3.3 NETWORK Setup Pages
91