Applying A License File - Spectracom SecureSync User Reference Manual

4.13 Upgrades and Licenses
If this is the case, see above-mentioned instructions for updating SecureSync software
(unless this has been addressed at an earlier update).
5.
Perform the actual upgrade by navigating to TOOLS > Upgrade/Backup > Actions :
Update System File : Upload the upgrade software bundle previously downloaded onto
your PC (
6.
Verify that the upgrade was successful: Tools > Upgrade/Backup , confirm the new SW
version.
4.13.2

Applying a License File

Software options like TimeKeeper, or Multi-GNSS must be
Typically, SecureSync units are shipped with the license file pre-installed, reflecting the system
configuration as ordered. If a feature is to be activated after delivery of the SecureSync unit, please
contact Spectracom Support or your local representative to have a license file generated. License
files are archive files with a
for multiple products.
To apply the license file, you need to upload it into your SecureSync unit and install it:
1.
Save the license file
nected to the same network SecureSync is.)
2.
Open the SecureSync Web UI, and navigate to Tools > Upgrade/Backup :
3.
In the Actions panel, click Apply License File .
4.
In the Apply License File window, click Upload New File .
276
), and carry out the upgrade, as instructed.
updateXYZ.tar.gz
extension. One license file may contain multiple licenses
tar.gz
license.tar.gz
CHAPTER
activated by applying a license file:
to a location on your PC (which needs to be con-
•
4 SecureSync User Reference Guide Rev. 18