The Administrator Login Password - Spectracom SecureSync User Reference Manual

3.7

The Administrator Login Password

The factory default administrator password value of
value to any desired value. If the current password is known, it can be changed, using the
SecureSync Web UI.
If the password has already been changed from the default value, but the current value is no longer
known, the administrator password can be reset back to the factory default value. Once reset, it
can then be changed to a new desired value via the web interface.
To change the admin password from a known value to another desired value using a web browser:
1.
2.
CHAPTER •
3 SecureSync User Reference Guide Rev. 18
NOTE – To follow this procedure, the user must be logged in as the
user. If you are unable to login as
ting the Administrator Password When Forgotten/Lost" on the next page.
Navigate to MANAGEMENT/OTHER/Change My Password .
The Change Password pop-up window will display.
3.7 The Administrator Login Password
admin123
can be changed from the default
, follow the procedure outlined in "Reset-
spadmin
spadmin
215