Issuing Halt Command Via The Web Ui - Spectracom SecureSync User Reference Manual

SecureSyncThe HALT command may be issued to the SecureSync through the Web UI, the front
panel serial port, or the front panel keypad.
Once the HALT process has been initiated via the Web UI or front panel, the front panel LCD will
display Power off SecureSync, and the front panel LED time display will stop incrementing.
3.9.1

Issuing HALT Command via the Web UI

1.
2.
3.
4.
CHAPTER •
3 SecureSync User Reference Guide Rev. 18
NOTE – Wait 30 seconds after entering the HALT command before removing power.
From the TOOLS drop-down menu choose SYSTEM/Reboot/Halt .
The Reboot/Halt window displays. Select the Shutdown the Unit checkbox.
Click the Submit button.
Wait 30 seconds after entering the HALT command before switching off the SecureSync
unit.
3.9 Issuing the HALT Command Before Removing Power
223