Status Monitoring With Timekeeper - Spectracom SecureSync User Reference Manual

4.5 TimeKeeper™
Next, ...
Configure TimeKeeper, see "Configuring a TimeKeeper PTP Master" on page 127, or "Con-
figuring TimeKeeper PTP Slaves" on page 130, or
Familiarize yourself with the TimeKeeper functionality, see "Status Monitoring with
TimeKeeper" below.
4.5.5

Status Monitoring with TimeKeeper

4.5.5.1 Enabling Status Monitoring
To display the TimeKeeper Status Monitoring functionality located on the right side of the Primary
Navigation menu under the MONITORING tab, for security reasons you have to navigate over a
secure http connection (https), see illustration below.
This login procedure must be carried out every time the browser is re-started.
236
NOTE – Once TimeKeeper has been enabled, the Spectracom NTPd service will be
replaced by the TimeKeeper NTP service, and vice versa.
After disabling TimeKeeper, the Spectracom NTP Service must be manually
enabled again ( MANAGEMENT
NTP to: ON).
> NTP Setup : In the panel
CHAPTER •
4 SecureSync User Reference Guide Rev. 18
NTP Services , slide