Ntp Peers: Adding, Configuring, Deleting - Spectracom SecureSync User Reference Manual

3.4.10

NTP Peers: Adding, Configuring, Deleting

1.
2.
3.
4.
CHAPTER •
3 SecureSync User Reference Guide Rev. 18
Navigate to the MANAGEMENT/NETWORK/NTP Setup screen.
The NTP Setup screen appears. The NTP Peers panel displays a list of recognized NTP
peers. Click the GEAR icon in the upper right-hand corner of the NTP Peers panel.
The NTP Peers pop-up window opens.
NOTE – Should the list be empty, no servers have been added yet. In the event that
added peers are not displayed in the NTP Setup screen/NTP Peers panel, they
could not be resolved. Verify the IP address.
To ADD a new peer server, click the PLUS icon in the upper right-hand corner, and proceed
to the next step.
To EDIT an existing peer server, click the corresponding ACTION GEAR button, or double-
click anywhere on the row, and proceed to the next step below
To DELETE an existing peer server, click the corresponding ACTION X-button, or double-
click anywhere on the row, then confirm by clicking OK.
Enter the required information in the fields:
Host —Enter is the IP address for the server to be used as host.
Min Poll Interval —Select a value from the drop down.
Max Poll Interval —Select a value from the drop down.
3.4 Network Time Protocol (NTP)
113