Configuring Snmp And Notifications - Spectracom SecureSync User Reference Manual

Data
Name
Message ID UID of the message; programmable
Message
Size
Seconds
NSec
EOM
Table 3-3:
3.3.7

Configuring SNMP and Notifications

SNMP (Simple Network Management Protocol) is a widely accepted application-layer protocol for
managing and monitoring network elements. It has been defined by the Internet Architecture Board
under RFC 1157 for exchanging management information between network devices, and is part of
the TCP/IP protocol.
SNMP agents must be enabled and configured so that they can communicate with the network
management system (NMS). The agent is also responsible for controlling the database of control
variables defined in the Management Information Base (MIB).
SecureSync's SNMP functionality supports SNMP versions V1, V2c and V3 (with SNMP
Version 3 being a secure SNMP protocol).
3.3.7.1 Accessing the SNMP Setup Screen
To access the SNMP Setup screen:
1.
CHAPTER •
3 SecureSync User Reference Guide Rev. 18
Data Description
Total message size in bytes
Seconds since epoch (00:00:00 Jan 1,
1970 UTC)
NSec within the current second
End-of-message
System Time Message Field Descriptions
Choose MANAGEMENT/NETWORK/SNMP Setup.
3.3 NETWORK Setup Pages
Range Resolution
Unsigned 32 bit 1
integer
Unsigned 32 bit 1
integer
Unsigned 32 bit 1
integer
Unsigned 32 bit 1
integer
-1 1
Units
n/a
Bytes
Seconds
nsec
n/a
85