Network Services: En-/Disabling - Spectracom SecureSync User Reference Manual

3.3.3

Network Services: En-/Disabling

The following Network Services can be toggled ON/OFF through the Network Services panel,
which is accessible via MANAGEMENT > NETWORK :
CHAPTER •
3 SecureSync User Reference Guide Rev. 18
System Time Message : A once-per second Time Message sent out via Multicast; for
details, see "System Time Message" on page 83.
Daytime Protocol, RFC867 : Network testing and measurement
Time Protocol, RFC 868 : Provision of machine-readable, site-independent date and time
Telnet : Remote configuration
FTP server : Access to logs
SSH : Secure Shell cryptographic network protocol for secure data communication
HTTP : Hypertext Transfer Protocol
HTTPS : Hypertext Transfer Protocol Secure
Classic UI : This toggle switch allows the SecureSync Classic Interface (as used in
SecureSync Web UI Version 4.x and older) to be enabled or disabled. [Default : ENABLED]
To disable, select the OFF position, and refresh the browser window (the refresh may take
a moment). The CLASSIC INTERFACE button in the upper right hand corner of the main
screen will disappear.
tcpdump : A LINUX program that can be used to monitor network traffic by inspecting tcp
packets. Default = ON.
If not needed, or wanted (out of concern for potential security risks), tcpdump can be dis-
abled permanently: Once toggled to OFF, and after executing a page reload, tcpdump will
3.3 NETWORK Setup Pages
63