Spectracom SecureSync User Reference Manual page 102

3.3 NETWORK Setup Pages
2.
The SNMP screen will display:
The SNMP screen is divided into 3 panels:
1.
The Main panel , which is subdivided into 3 displays:
86
SNMP V1/V2 —This panel allows configuration of SNMP v1 and v2c communities
(used to restrict or allow access to SNMP). This tab allows the configurations for
SNMP v1 and v2c, including the protocols allowed, permissions and Community
names as well as the ability to permit or deny access to portions of the network.
Clicking on the "+" symbol in the top-right corner opens the SNMP V1/V2c Settings
for Access Screen. See "Configuring SNMP V1/V2 Communities" on the facing
page.
SNMP V3 —This panel allows configuration of SNMP v3 functionality, including the
user name, read/write permissions, authorization passwords as well as privilege
Types and Passphrases. Clicking on the "+" symbol in the top-right corner opens the
SNMP V3 Screen. See "Configuring SNMP V3 Users" on page 89.
SNMP Traps —This panel allows the ability to define up to five different SNMP Man-
agers that SNMP traps can be sent to over the network. This allows for SNMP Man-
agers in different geographical areas to receive the same SNMP traps and Managers
in other areas also receive. Clicking the PLUS icon in the top-right corner opens the
CHAPTER •
3 SecureSync User Reference Guide Rev. 18