Spectracom SecureSync User Reference Manual page 72

3.3 NETWORK Setup Pages
4.
The Static Routes panel displays the port's routing table.
3.3.2.8 Adding/Deleting a Static Route to a Port
To add an interface route to a port's routing table:
1.
Navigate to the Network Management screen through the MANAGEMENT/NETWORK
dropdown menu.
2.
The Ports panel will show the Ethernet ports you have available and their connection
status.
3.
In the Ports panel, locate the port you want to configure, and click the TABLE button. The
Static Routes window will display:
56 CHAPTER •
3 SecureSync User Reference Guide Rev. 18