Spectracom SecureSync User Reference Manual page 112

3.4 Network Time Protocol (NTP)
To open the NTP Setup screen, select MANAGEMENT > NETWORK > NTP Setup:
The NTP Setup screen is divided into 4 panels:
The NTP Main
NTP Servers : In this display you can view the NTP Servers that SecureSync detects in
your network. It is through this display that you configure external NTP references. See
"NTP Servers: Adding, Configuring, Deleting" on page 111.
NTP Peers : In this display you can view the NTP Peers that SecureSync detects in your
network. It is through this display that you configure NTP Peer reference inputs. See "NTP
Peers: Adding, Configuring, Deleting" on page 113.
For more information on NTP servers, peers, and stratums see "NTP Servers & Peers (Stratum
Synchronization)" on page 98.
The Actions
96
panel on the right-hand side of the NTP screen is divided into 2 sub-panels:
panel in the top left-hand corner of the NTP screen comprises the following buttons:
CHAPTER •
3 SecureSync User Reference Guide Rev. 18