Spectracom SecureSync User Reference Manual page 69

3.
3.3.2.5 Viewing Static Routes
To view SecureSync's Static Routes:
1.
2.
3.
CHAPTER •
3 SecureSync User Reference Guide Rev. 18
In the Ports panel, you can see the connection status of each Ethernet port available. The
three possible statuses are:
CONNECTED (showing the connection speed) in green
DISABLED in red
CABLE UNPLUGGED (the port is enabled but there is not cable attached) in
orange.
Navigate to the Network Management screen through the MANAGEMENT/NETWORK
dropdown menu.
The Ports panel will show the Ethernet ports you have available and their connection
status.
In the Ports panel, click the TABLE icon in the upper right-hand corner. The Static Routes
window will display:
3.3 NETWORK Setup Pages
53