System Time - Spectracom SecureSync User Reference Manual

3.6 OTHER Setup Pages
4.
To configure the applicable example email configuration, delete the comments ("#") from
each line and replace the "<>" with the appropriate values for your particular email server
(such as the user name and password for your Email server).
E x a m p l e I : S M T P i n t e r f a c e t o M S E x c h a n g e
#set smtp=<server name, example: exchange.example.com>
#set smtp-auth-user=<user name>
#set smtp-auth-password=<password>
#set smtp-auth=login
E x a m p l e I I : S M T P i n t e r f a c e t o G m a i l
#set smtp=smtp.gmail.com:587
#set smtp-use-starttls
#set ssl-verify=ignore
#set smtp-auth-user=<user name, example user_xyz123@gmail.com>
#set smtp-auth-password=<password>
#set smtp-auth=login
5.
Click the Submit button at the bottom of the window.
6.
To test your settings:
Additional information on this subject can be found in the Spectracom Technical Note "
Notification Setup with SecureSync, NetClock
3.6.7

System Time

The time that SecureSync maintains is referred to as the
System Time is synchronized to SecureSync's input references (such as GNSS, IRIG, ASCII
data, NTP, PTP, etc.).
Alternatively, the System Time can be manually configured by the user to a desired time/date, or it
can be operated without external time reference (but with an external PPS reference)—this is called
Local System reference.
The System Time is used to generate all of the available time-of-day outputs (such as the front
panel LED display, NTP time stamps, time stamps in the log entries, ASCII data outputs, etc.)
164
In the Test Email Address field, enter an email address.
Click the Send Test Email button.
A notification that your email has been sent will appear at the top of the window.
".

System Time

CHAPTER •
3 SecureSync User Reference Guide Rev. 18
Email
. By default, the