Spectracom SecureSync User Reference Manual page 125

Factory default NTP.conf file:
restrict 127.0.0.1
restrict ::1
restrict default noquery nomodify
restrict -6 default noquery nomodify
keys /etc/ntp/keys/ntp.keys
controlkey 65533
requestkey 65534
trustedkey 65533 65534
server 127.127.45.0 prefer minpoll 4
server 127.127.22.0 minpoll 4
fudge 127.127.22.0 stratum 0
peer 10.10.128.35 minpoll 3 maxpoll 3 autokey
keysdir /etc/ntp/keys/
crypto pw admin123 randfile /dev/urandom
driftfile /etc/ntp/ntp.drift
logfile /home/spectracom/log/ntp.log
statsdir /home/spectracom/log/ntpstats/
statistics loopstats peerstats clockstats
filegen loopstats file loopstats type day enable
filegen peerstats file peerstats type day enable
filegen clockstats file clockstats type day enable
Prior to Expert mode being enabled, the Network/NTP Setup page will contain various tabs for
configuring different options of the NTP Service. To prevent inadvertent changes from being made
to a user-edited NTP.conf file via the web pages, these NTP configuration tabs are removed from
the web browser view as long as the Expert mode remains enabled (only the Expert Mode tab is
visible in Expert Mode; all other tabs will no longer be present). Disabling the Expert mode restores
these tabs to the Edit NTP Services window.
To enable the Expert Mode to edit the
1.
2.
CHAPTER •
3 SecureSync User Reference Guide Rev. 18
Caution: If changes are made to the
Expert mode should remain enabled from that point forward. Disabling Expert mode
after changes being made to this file may result in loss of this configuration inform-
ation.
Navigate to the MANAGEMENT/NETWORK/NTP Setup screen.
In the NTP Services panel locate the Expert Mode switch.
file while in the Expert mode,
NTP.conf
file directly:
NTP.conf
3.4 Network Time Protocol (NTP)
109