Spectracom SecureSync User Reference Manual page 74

3.3 NETWORK Setup Pages
3.
The pop-up window displays:
4.
Enter a valid IP address in the Allow From field.
5.
Click the Add button in the Action column.
6.
The established rule appears in the Network Access Rules window.
58
The address entered can be use IPv4, IPv4 CIDR, IPv6, or IPv6 CIDR addresses
(meaning individual IP addresses or IP address ranges), e.g.:
IPv4—
10.10.0.0/16
the subnet mask in prefix form. See "Network Configuration Without DHCP"
on page 32 for information on subnet masks.
IPv6—
2001:db8::/48
2001:db8:0:ffff:ffff:ffff:ffff:ffff.
, where is the IP address and
10.10.0.0
, representing
2001:db8:0:0:0:0:0:0
CHAPTER •
3 SecureSync User Reference Guide Rev. 18
is
16
to