Editing The Settings Of An Input Reference - Spectracom SecureSync User Reference Manual

4.6

Editing the Settings of an Input Reference

Depending on the type of input reference, some of its settings may be user-editable. To access
these settings for a given input reference, choose one of the two methods described below.
There are two ways to access the settings Status window for an input reference:
How to edit input reference settings, method 1:
1.
Under INTERFACES/REFERENCES , click the desired reference.
2.
The Status window for the specific reference you selected will be displayed. Click the Edit button
in the bottom-left corner.
3.
The settings window for the chosen reference will be displayed. Edit the field(s) as desired.
CHAPTER •
4 SecureSync User Reference Guide Rev. 18
NOTE – The illustrations shown below are only examples. The windows displayed in
your Web UI may look differently, depending on the type of input reference (GNSS,
IRIG, PNT, etc.).
4.6 Editing the Settings of an Input Reference
239