Spectracom SecureSync User Reference Manual page 477

Command
Stateset
status
syncstate
sysupgrade
testevent
tfomget
timeget
timeset
unrestrict
version
yearget
yearset
zeroize
CHAPTER •
7 SecureSync User Reference Guide Rev. 18
Enable or disable an entry in the reference priority table. index = 0...15. state = 0
(disable), 1 (enable)
Displays information about the oscillator disciplining
Display timing system synchronization state
Performs system upgrade using the update bundle provided
Generates SNMP events in the enterprise MIB
Displays current estimated system time error (TFOM – Time Figure of Merit)
Displays current system time (time is displayed in the configured timescale – See
scaleget command to retrieve the configured timescale)
Used to manually set the current time (hours, minutes in seconds); time is entered
based on the configured timescale – See scaleget command to retrieve the con-
figured timescale
Used for clearing access control restrictions to SecureSync
Displays the installed main SecureSync and timing system software versions
Displays the current year
Used to set the current year
Applicable to SAASM-equipped SecureSync units only
Description
7.2 CLI Commands
461