Spectracom SecureSync User Reference Manual page 122

3.4 Network Time Protocol (NTP)
Figure 3-2:
Figure 3-3:
3.4.6.1 Configuring NTP over Anycast
To setup the NTP over Anycast functionality:
1.
Confirm that your existing network infrastructure is Anycast capable, and uses OSPF.
Determine network specifics, such as the Anycast address, and OSPF areas.
2.
In the SecureSync Web UI, navigate to MANAGEMENT > Network > NTP Setup (see
illustration above.)
3.
In the Actions Panel , click NTP over Anycast .
4.
In the NTP over Anycast window, check Enable .
106
All NTP servers are synchronized
NTP server 1 is out of sync
CHAPTER •
3 SecureSync User Reference Guide Rev. 18