Typical Post-Installation Configurations; Displaying Local Time; Synchronizing Network Pcs; Product Registration - Spectracom SecureSync User Reference Manual

2.13 Typical Post-Installation Configurations
Network Bits Equivalent Netmask Network Bits Equivalent Netmask
30
29
28
27
26
25
24
23
22
21
20
19
Table 2-2:
2.13

Typical Post-Installation Configurations

2.13.1

Displaying Local Time

After physical product installation, a commonly requested scenario is for SecureSync to display
local time on the front panel (rather than UTC time). To learn more about this configuration, see
"Editing the System Time" on page 169, and "Front Panel Configuration" on page 178.
2.13.2

Synchronizing Network PCs

Frequently, network PCs have to be synchronized to SecureSync via the Ethernet port, using NTP
(Network Time Protocol). A detailed description on how to synchronize Windows PCs can be
found online in the Spectracom Technical Note
tracom website
tracom PresenTense NTP client software.
2.14

Product Registration

Spectracom recommends that you register your SecureSync so as to allow our Customer Service
and Technical Support to notify you of important software updates, or send you service bulletins, if
required.
36
255.255.255.252
255.255.255.248
255.255.255.240
255.255.255.224
255.255.255.192
255.255.255.128
255.255.255.0
255.255.254.0
255.255.252.0
255.255.248.0
255.255.240.0
255.255.224.0
Subnet mask values
. This document also contains information and details about using the Spec-
18 255.255.192.0
17 255.255.128.0
16 255.255.0.0
15 255.254.0.0
14 255.252.0.0
13 255.248.0.0
12 255.240.0.0
11 255.224.0.0
10 255.192.0.0
9 255.128.0.0
8 255.0.0.0
Synchronizing Windows Computers
CHAPTER •
2 SecureSync User Reference Guide Rev. 18
Spec-
on the