Spectracom SecureSync User Reference Manual page 63

The Actions
The Network Services
as the Web UI display mode, details see: "Network Services: En-/Disabling" on page 63.
The Ports
CHAPTER •
3 SecureSync User Reference Guide Rev. 18
panel provides:
General Settings : Allows the user quick access to the primary network settings neces-
sary to connect SecureSync to a network. See "NETWORK Setup Pages" on page 44.
Access Control : Allows the configuration of access restrictions from assigned net-
works/nodes.
Login Banner : Allows the administrator to configure a custom banner message to be dis-
played on the SecureSync Web UI login page (NOTE: There is a 2000 character size limit).
SSH : This button takes you to the SSH Setup window. For details on setting up SSH, see
"Configuring SSH" on page 74.
HTTPS : This button takes you to the HTTPS Setup window. For details on setting up
HTTPS, see "Configuring HTTPS" on page 64.
System Time Message : Setup a once-per-second time message to be sent to receivers
via multicast. For details, see .
panel is used to enable (ON) and disable (OFF) network services, as well
panel is used to set up and manage SecureSync's network ports via three buttons:
3.3 NETWORK Setup Pages
47