Spectracom SecureSync User Reference Manual page 56

3.4.11 Configuring NTP Symmetric Keys (MD5 Authentication)
3.4.12 Configuring NTP Access Restrictions
3.4.13 Viewing NTP Clients
3.4.14 Restoring the Default NTP Configuration
3.4.15 Enabling and Disabling NTP
3.4.16 Enabling/Disabling NTP Broadcasting
3.4.17 Configuring NTP Autokey
3.4.18 NTP Stratum Configuration
3.5 Configuring TimeKeeper
3.5.1 Has TimeKeeper been activated?
3.5.2 Configuring a TimeKeeper PTP Master
3.5.3 Configuring TimeKeeper PTP Slaves
3.5.4 Configuring TimeKeeper as an NTP Time Server
3.6 OTHER Setup Pages
3.6.1 Authentication
3.6.2 Managing Password Security
3.6.3 Configuring LDAP Authentication
3.6.4 RADIUS Authentication
3.6.5 Input Reference Priorities
3.6.6 Notifications
3.6.7 System Time
3.6.8 Front Panel Configuration
3.6.9 Backing-up and Restoring Configuration Files
3.6.10 Oscillator Disciplining
3.6.11 Holdover Mode
3.6.12 1PPS and 10 MHz Outputs
3.6.13 Signature Control
3.6.14 The GNSS Reference
3.6.15 Configuring the GNSS Receiver
3.6.16 Viewing the Status of a GNSS Reference
3.7 The Administrator Login Password
3.7.1 Resetting the Administrator Password When Forgotten/Lost
3.8 Resetting the Unit to Factory Configuration
3.8.1 Resetting All Configurations to their Factory Defaults
3.8.2 Resetting the GNSS Receiver Position
3.8.3 Clearing Locally Stored Logs: All Files
3.8.4 Clearing Locally Stored Logs: Selected Files
3.9 Issuing the HALT Command Before Removing Power
3.9.1 Issuing HALT Command via the Web UI
3.9.2 Issuing HALT Command via Keypad/SerialPort/Telnet/SSS
3.10 Rebooting the System
3.10.1 Rebooting via LCD/Keypad, Serial Port, Telnet, SSH, SNMP
3.11 If a Secure Unit Becomes Inaccessible
40 CHAPTER •
3 SecureSync User Reference Guide Rev. 18
114
117
119
120
120
120
121
123
126
126
127
130
132
134
134
137
138
142
148
157
164
178
182
188
195
197
201
202
205
211
215
216
218
218
219
221
222
222
223
224
224
225
225