Spectracom SecureSync User Reference Manual page 191

3.6.7.10 Setting up a Local Clock
The Local Clock feature allows maintaining several times which reflect a time offset, thereby
accounting for Time Zone and DST (Daylight Savings Time) correction.
1.
2.
3.
4.
5.
CHAPTER •
3 SecureSync User Reference Guide Rev. 18
NOTE – The Delete button in the Edit Leap Second window will only be visible, if a
leap second has been set in the first place.
Navigate to MANAGEMENT/OTHER/Time Management .
Click the PLUS icon in the Local Clocks panel in the Time Management screen.
The Local Clock pop-up window will display.
Enter a Name for your local clock.
The name must be between 1 and 64 characters long; spaces are allowed.
The name can be any meaningful name that helps you know your point of reference
(for example: "New York", "Paris" or "Eastern HQ", etc.).
This name will be used as cross-reference drop-down in the applicable Input or Out-
put port configuration. Please note the following limitations apply to this option:
Acceptable characters for the name include: A-Z, a-z, 0-9 and (-+_) and
spaces are converted to underscores because the name must be a single
word.
In the UTC Offset field, choose a UTC Offset from the drop-down list.
3.6 OTHER Setup Pages
175