Editing Output Settings - Spectracom SecureSync User Reference Manual

1.
In the INTERFACES/OUTPUTS drop-down menu, click the desired output.
2.
The corresponding Status window will display.
Click the Edit button in the bottom-left corner o configure settings that are user-editable. See also
"Outputs Status Monitoring" on page 240.
4.8

Editing Output Settings

Depending on the type of output interface, some of its settings may be user-editable. To access
these settings for a given output, choose one of the two methods described below.
CHAPTER •
4 SecureSync User Reference Guide Rev. 18
NOTE – The illustrations shown below are only examples. The windows displayed in
your Web UI may look differently, depending on the type of output (1PPS, 10 MHz,
PTP, etc.).
4.8 Editing Output Settings
243