Spectracom SecureSync User Reference Manual page 291

Step-by-Step Instructions:
1.
2.
3.
4.
CHAPTER •
4 SecureSync User Reference Guide Rev. 18
These instructions apply to existing software versions 5.1.5 and higher. Vari-
NOTE –
ations may exist for specific update, these will be covered in the above-mentioned
instructions for updating
In the Web UI, under Tools > Upgrade/Backup , determine the
and the type of GNSS receiver
you have a RES-SMT GG receiver.
(Otherwise, consult the above-mentioned instructions for updating SecureSync software.)
Free up disk space, if needed:
Under Tools > Upgrade/Backup > Disk Status , check Percent Used : If the number is
greater than 70% , free up disk space.
(NOTE: If required, existing logs can be archived; for details consult the above-mentioned
instructions for updating SecureSync software.)
To free up disk space:
a.
Delete old log files: Tools > Upgrade/Backup > Disk Status > Clear All Logs .
b.
Delete old statistics files: [~] > Clear All Stats .
c.
Delete previous Upgrade files: : Tools > Upgrade/Backup > Actions > Update
System > Delete Upgrade File (s). Note that Delete Upgrade File and Update
System cannot be selected at the same time.
Download
the upgrade software bundle onto your PC.
Check if you have any of the following option cards installed:
Simulcast (Model 1204-14)
PTP (Model 1204-12)
Gigabit Ethernet (Model 1204-06)
SecureSync software .
. Proceed if your existing software is V5.1.5 or higher, AND
4.13 Upgrades and Licenses
System software version
275