Viewing Ntp Clients - Spectracom SecureSync User Reference Manual

5.
3.4.13

Viewing NTP Clients

To view the NTP clients being served by SecureSync:
1.
2.
3.
CHAPTER •
3 SecureSync User Reference Guide Rev. 18
Require Authentication (checkbox)—Check this box if you want the addi-
tional security of authorized access. SecureSync to accept only authen-
ticated requests (MD5 or Autokey) from this user or network segment.
Allow NTP Queries (checkbox)—Check this box if you would like to allow
NTPDC or NTPQ client access. NTPDC and NTPQ are utilities for con-
trolling NTP servers and gathering performance data from NTP servers. Modi-
fication or control of a SecureSync's NTP service through NTPDC or NTPQ
is not supported.
Click the Submit button.
Navigate to the MANAGEMENT/NETWORK/NTP Setup screen.
In the NTP Actions panel click the View NTP Clients button.
The NTP Clients window will display, showing a table of the clients that are synchronizing
to SecureSync via NTP:
You can search any of the fields for specific information in the Search field at the top of the
window.
A limit of 10 entries will appear on the screen at any one time. If you have more than
10 clients, you can move through the table using the First , Previous , Next and Last nav-
igation buttons at the bottom of the screen.
3.4 Network Time Protocol (NTP)
119