Default And Recommended Configurations; Network Setup - Spectracom SecureSync User Reference Manual

3.2 Default and Recommended Configurations
3.2

Default and Recommended Configurations

The factory default configuration settings were chosen for ease of initial setup. Refer to the recom-
mended settings listed here as applicable for your unit.
Table 3-1:
*Spectracom recommends that secure clients use only SNMPv3 with authentication for secure
installations.
3.3 NETWORK Setup Pages
All of the network setup pages can be accessed from the MANAGEMENT drop-down menu, under
NETWORK .
44
Feature Default Setting
HTTP Enabled
HTTPS Enabled (using customer-generated certificate and key or
default Spectracom self-signed certificate and common pub-
lic/private key SSH/SCP/SFTP enabled with unit unique
1024-bit keys)
SNMP Enabled
NTP Enabled (with no MD5
values entered)
Daytime Disabled
Protocol
Time Pro- Disabled
tocol
Serial Available
Port
Telnet Enabled
SSH Enabled (default
private keys provided)
FTP Enabled
SCP Available
SFTP Available

Default and recommended configurations

Recommended Setting
Disabled
Disabled or Enabled (with SNMP
v3 w/ encryption*)
Enabled (use MD5 authentication
with user-defined keys)
Disabled
Disabled
Command Line Interface
Available
Disabled (use SSH instead)
Enabled
File Transfer
Disabled (use SFTP or SCP)
Disabled (use SFTP or SCP)
Disabled (use SFTP or SCP)
CHAPTER •
3 SecureSync User Reference Guide Rev. 18
Where to
Configure
Web UI or
CLI
Web UI
Web UI
Web UI
Web UI
Web UI
n/a
Web UI
Web UI
Web UI
Web UI
Web UI