Spectracom SecureSync User Reference Manual page 157

3.6.3.3 LDAP Group Settings
Under the LDAP Group tab, you can filter access by group.
To enable group authentication:
a.
b.
c.
3.6.3.4 LDAP Advanced Settings
Under the LDAP Advanced tab, you can set the search filter and the LDAP login attribute.
Fill in the following fields, as desired:
3.6.3.5 LDAP Servers Settings
Under the Servers tab, you manage the LDAP server(s) to be accessed:
CHAPTER •
3 SecureSync User Reference Guide Rev. 18
Select the Enable group filter checkbox.
Enter information for:
Required Group —Enter the required group. Example. :
dc=example, dc=com
Group Attribute —Enter the group attribute. Example:
NSS base group —Enter the nss_base group. Example: ou=Group, dc=example,
dc=com?one.
Click the Submit button.
Search filter —This is the LDAP search filter. Example:
Login Attribute —This is the LDAP login attribute. Example:
Verify Certificate (checkpeer) —Select this checkbox if you wish to turn on checkpeer
authentication.
.
member
objectclass=user
sAMAccountName
3.6 OTHER Setup Pages
ou=Group,
.
.
.
141