Daewoo MATIZ Service Manual page 639

5B – 14 FIVE-SPEED MANUAL TRANSAXLE
24. Position the manual transaxle assembly in tilting.
D To remove the manual transaxle side cover with-
out the interference with the front under longitudi-
nal panel (Left), tilt the engine/manual transaxle by
loosening the engine support fixture DW110– 021
joint with the wrench.
D13B5141
25. Remove the manual transaxle assembly.
D Lower the transaxle assembly slowly by adjusting
jack.
a. Jack.
b. Transaxle assembly.
D Tilt the transaxle assembly by adjusting jack.
D Remove the transaxle assembly by pulling and
lowering it slowly.
D13B5151
26. Support the engine to normal position using the en-
gine support fixture DW110–021.
Notice: The abnormal position of the engine may dam-
age to the related parts or interfere with them. You have
to support the engine to normal position when removing
the transaxle.
Important: If it is impossible to use the special tool, sup-
port the engine to normal position with the auto jack.
D103B516
Installation Procedure
1. Install in the reverse order of removal.
2. Install the transaxle mounting bolts.
Tighten
Tighten the transaxle mounting bolts (body side) to
45–55 NSm (33–41 lb-ft).
D13B5171
DAEWOO M-150 BL2