Daewoo MATIZ Service Manual page 415

DAEWOO M-150 BL2
Installation Procedure
1. Install the CKP sensor.
2. Tighten the CKP sensor retaining bolt to 5–8 NSm
(44–71 lb-in).
MAA1F550
CAMSHAFT POSITION (CMP)
SENSOR
Removal Procedure
1. Disconnect the negative battery cable.
2. Disconnect the camshaft position (CMP) sensor con-
nector.
3. Remove the CMP sensor retaining bolt.
4. Remove the CMP sensor.
UAA1F2E0
Installation Procedure
1. Install the CMP sensor.
2. Tighten the CMP sensor retaining bolt to 10–14 NSm
(89–124 lb-in).
MAA1F540
ENGINE CONTROL MODULE (ECM)
Removal Procedure
1. Disconnect the ECM connector.
MAA1F510
ENGINE CONTROLS 1F – 317