Tailgate Lock Cylinder; Door Hinge - Daewoo MATIZ Service Manual

DAEWOO M-150 BL2
Installation Procedure
Notice: Dissimilar metals in direct contact with each
other may corrode rapidly. Make sure to use the correct
fastener to prevent premature corrosion.
1. Connect the body–to–tailgate rubber grommet.
2. With the aid of another technician, lightly secure the
tailgate with the bolts.
3. Adjust the tailgate for proper fit.
4. Install the tailgate strut. Refer to "Tailgate Strut" in this
section.
5. Connect the tailgate electrical connector.
6. Install the luggage compartment wheelhouse trim pan-
el. Refer to Section 9G, Interior Trim.
D19C614A
7. Connect the negative battery cable.

TAILGATE LOCK CYLINDER

Removal Procedure
1. Disconnect the negative battery cable.
2. Open the tailgate.
3. Remove the rear window wiper motor assembly. Re-
fer to Section 9D, Wipers/Washer Systems.
4. Remove the tailgate lock cylinder.
D Disconnect the tailgate lock rod (1).
D Remove the nuts from the tailgate lock cylinder (2).
D Remove the tailgate lock cylinder (3).
D209B113
Installation Procedure
1. Install the tailgate lock cylinder.
2. Install the rear window wiper motor assembly. Refer
to Section 9D, Wipers/Washer Systems.
3. Connect the negative battery cable.
D209B114

DOOR HINGE

Removal Procedure
1. With the aid of another technician, remove the door
hinge.
D Remove the hinge–to–body bolts (1).
D Remove the hinge–to–door bolts (2).
D Remove the door hinge (3).
D109C615
DOORS 9P – 23