Daewoo MATIZ Service Manual page 698

6B – 4 POWER STEERING PUMP
18–22 NSm
20–24 NSm
REPAIR INSTRUCTIONS
ON–VEHICLE SERVICE
D105C524
D105C525
20–24 NSm
D15C526A
PUMP DRIVE BELT
Removal Procedure
1. Remove the front passenger side headlamp. Refer to
Section 9B, Lighting Systems.
2. Remove the pump drive belt.
D Loosen the rear bracket adjusting bolt (1).
D Loosen the bolt (2).
D Loosen the front bracket adjusting bolts (3).
D Push the pump forward (4).
Installation Procedure
1. Install the pump drive belt with the bolts.
Tighten
D Tighten the front bracket adjusting bolt to 18–22
NSm (13–16 lb-ft) (1).
D Tighten the rear bracket adjusting bolt to 20–24
NSm (15–18 lb-ft) (2).
D Tighten the power steering pump bolt to 20–24
NSm (15–18 lb-ft) (3).
2. Install the front passenger side headlamp. Refer to
Section 9B, Lighting Systems.
DAEWOO M-150 BL2