Daewoo MATIZ Service Manual page 713

6C – 10 POWER STEERING GEAR
Important: Hit the drift using a hammer when the lower
pinion is vertical with the drift.
D Remove the bearing by hitting the bearing with the
flated drift and rubber hammer (6).
D105C706
D Remove the pinion shaft seal (7).
D Remove the needle bearing (8).
D Remove the retaining ring (9).
Important: The power steering gear housing and the
rack gear in this vehicle is not serviceable as unit.
The faulty parts must be replaced as whole units.
D105C707
Inspection Procedure
1. Inspect the tie rod ends and the ball joints for dam-
age. Refer to Section 6D, Manual Steering Gear.
2. Inspect the tie rod ends and the rack/pinion boot for
cracks or abnormal wear. Refer to Section 6D, Manu-
al Steering Gear.
3. Inspect the metal part for damage.
D Inspect the pinion gear for damage or wear (1).
D105C708
D Inspect the rack gear for damage or wear (2).
D Inspect the steering gear housing for damage or
wear(3).
D105C709
DAEWOO M-150 BL2