Differential - Daewoo MATIZ Service Manual

5B – 48 FIVE-SPEED MANUAL TRANSAXLE
Low Speed High Speed
Shift Shaft Shift Shaft
Inspection Procedure – Shift Fork
1. Measure the end thickness of shift fork and replace if
below limit.
Low Speed Shift Fork
High Speed Shift Fork
Fifth Gear Shift Fork
D103B787
Assembly Procedure
1. Install in the reverse order of removal.
5th/Reverse
Important: Use only new fork fin and yoke pin.
Shift Shaft
D103B788

DIFFERENTIAL

Disassembly Procedure
1. Remove the differential assembly. Refer to "Gear
Unit" in this section.
2. Remove the differential ring gear.
D Fix the differential assembly to a vise with protec-
D Remove the bolts (1).
D Remove the ring gear (2).
D103B789
3. Remove the pinion gear pin.
D Remove the pin using a pin punch and a hammer
D103B790
Shift fork end
Standard
thickness (mm)
8.7 (0.343)
7.8 (0.307)
7.8 (0.307)
tor.
(1).
Unit : mm (in.)
Limit
8.1 (0.319)
7.2 (0.283)
7.2 (0.283)
DAEWOO M-150 BL2