Table of Contents
Advertisement
9R – 8 BODY FRONT END
HOOD LATCH RELEASE LEVER
(Left–Hand Drive Shown, Right–Hand
Drive Similar)
Removal Procedure
1. Remove the hood latch nut into the instrument panel.
a. Hood latch nut.
D109C535
2. Remove the hood latch release lever.
D Disconnect the cable (1).
D Remove the hood latch release lever (2).
D109C536
Installation Procedure
1. Connect the hood latch release cable to the hood
latch lever.
D19C536A
Notice: Dissimilar metals in direct contact with each
other may corrode rapidly. Make sure to use the correct
fasteners to prevent premature corrosion.
2. Install the hood latch lever release to the instrument
panel with the hood latch nut.
D109C537
DAEWOO M-150 BL2
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the MATIZ and is the answer not in the manual?
Questions and answers
Δεν βρίσκω στην ιστοσελίδα σας, Κεραία κλειδαριάς τιμονιού ,.. Imobilaizer .. Τον δακτύλιο αυτού, που με ένα φισάκι με δύο καλώδια πάει και κουμπώνει στον αφαλό Ευχαριστώ