Rear Door Exterior Garnish Molding; Tailgate Trim Panel - Daewoo MATIZ Service Manual

Table of Contents

Advertisement

DAEWOO M-150 BL2
REAR DOOR EXTERIOR GARNISH
MOLDING
Removal Procedure
1. Pry off the interior garnish molding. Refer to "Rear
Door Interior Garnish Molding" in this section.
2. Pry off the exterior garnish molding.
D Remove the screw (1).
D Pry off exterior garnish molding (2).
D109E551
Installation Procedure
1. Install the exterior garnish molding with the screw.
2. Install the interior garnish molding. Refer to "Rear
Door Interior Garnish Molding" in this section.
D109E552

TAILGATE TRIM PANEL

Removal Procedure
1. Open the tailgate.
2. Remove the trim from the tailgate.
D Remove the clips by pushing the center of the clip
(1).
D Remove the trim (2).
D19E553A
Installation Procedure
1. Install the trim to the tailgate.
Notice: In case of the loose clips, replace the clips with
the new ones.
D19E554A
INTERIOR TRIM 9G – 9

Advertisement

Table of Contents
loading

This manual is also suitable for:

My2003

Table of Contents