DAEWOO M-150 BL2
Installation Procedure
1. Install the license plate lamp socket.
2. Install the tailgate handle. Refer to Section 9M, Exte-
rior Trim.
3. Connect the electrical connector.
4. Remove the rear window wiper motor assembly. Re-
fer to Section 9D, Wipers/Washer Systems.
5. Install the license plate lamp bulb.
6. Install the license plate lamp with the screws.
7. Connect the negative battery cable.
D19D512A
DOOR JAMB SWITCH
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the door jamb switch.
D Remove the screw (1).
D Disconnect the electrical connector (2).
D Remove the door jamb switch (3).
D109D513
Installation Procedure
1. Install the door jamb switch with the screw.
2. Connect the electrical connector.
3. Connect the negative battery cable.
D109D514
INTERIOR COURTESY LAMP
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the interior courtesy lamp.
D Pry off the interior courtesy lamp lens (1).
D Remove the screws (2).
D Disconnect the electrical connector (3).
D Remove the interior courtesy lamp (4).
D19D515A
LIGHTING SYSTEMS 9B – 13