Table of Contents
Advertisement
7A – 20 HEATING AND VENTILATION SYSTEM
BLOWER MOTOR AND COOLING
HOSE
(Left–Hand Drive Shown, Right–Hand
Drive Similar)
Removal Procedure
1. Remove the blower motor cooling hose.
D108A507
2. Remove the blower motor.
D Disconnect the motor electrical connector (1).
D Turn the blower motor (2).
D108A508
Installation Procedure
1. Install the blower motor by turning the motor clock-
wise.
2. Connect the motor electrical connector.
3. Install the blower motor cooling hose.
D108A509
BLOWER RESISTOR
(Left–Hand Drive Shown, Right–Hand
Drive Similar)
Removal Procedure
1. Remove the blower resistor.
D Disconnect the blower resistor connector (1).
D Remove the screws (2).
D108A510
DAEWOO M-150 BL2
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the MATIZ and is the answer not in the manual?
Questions and answers
Δεν βρίσκω στην ιστοσελίδα σας, Κεραία κλειδαριάς τιμονιού ,.. Imobilaizer .. Τον δακτύλιο αυτού, που με ένα φισάκι με δύο καλώδια πάει και κουμπώνει στον αφαλό Ευχαριστώ