Daewoo MATIZ Service Manual page 1050

RECOMMENDED MATERIALS FOR WATERLEAK REPAIRS
Leak Areas
Windshield, back window
Metal joints
Ventilation ducts
Small cracks and pin holes
Large holes
Weatherstrips
Bolts, studs, and screws
Application
Nozzle Type
Nozzle Height
Volume of Flow
Pressure
Windshield and A-Pillar Test Stand Position
B-Pillar Test Stand Position
Back Window and tailgate Test Stand Position
DAEWOO M-150 BL2
SPECIFICATIONS
WATERTEST STAND SPECIFICATIONS
Repair Materials
Urethane adhesive, caulking kit, or the equivalent
Brushable seam sealer which can be painted
TM
3M Auto Bedding and Glazing Compound or the
equivalent
TM
3M Drip-Check Sealer or the equivalent
TM
3M Automotive Joint and Seam Sealer
TM
3M 08011 Weatherstrip Adhesive or the equivalent
Strip caulk
Description
Full jet spray nozzle #1/2 GG-25 or equivalent with a
60° included angle
Approximately 1,600 mm (63.0 in.) from the floor
14L (3.7 gal) per minute
155 kPa (22.5 psi) measured at the nozzle
Approximately 30° down, 45° toward the rear, and
aimed at the corner of the windshield
Approximately 30° down, 45° toward the rear, and
aimed at the center of the rear door
Approximately 30° down, 45° toward the front and
aimed approximately 610 mm (24.0 in.) from the
corner of the back window
WATERLEAKS 9I – 7