Table of Contents
Advertisement
65 – 80 NSm
DAEWOO M-150 BL2
D16B515A
40–50 NSm
D16B516A
D16B517C
10 – 14 NSm
D16B518B
FRONT SUSPENSION 2C – 11
Installation Procedure
1. Install in the reverse order of removal.
Important: When installing the mountings, position the
opened mountings forward.
2. Install the stabilizer shaft to the vehicle.
D Install the castellated nut.
Tighten
Tighten the stabilizer shaft–to–body castellated nut to
40–50 NSm (30–36 lb-ft).
D Install the cotter pin.
3. Install the front under longitudinal frame.
D Install the stabilizer shaft mounting bolts (1).
Tighten
Tighten the mounting bolts to 30–50 NSm (22–36 lb-
ft).
D Install the front under longitudinal frame bolt (2).
Tighten
Tighten to bolt to 10–14 NSm (89–124 lb-in).
D Install the front under longitudinal frame nut (3).
Tighten
Tighten to nut to 65–80 NSm (48–59 lb-ft).
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the MATIZ and is the answer not in the manual?
Questions and answers
Δεν βρίσκω στην ιστοσελίδα σας, Κεραία κλειδαριάς τιμονιού ,.. Imobilaizer .. Τον δακτύλιο αυτού, που με ένα φισάκι με δύο καλώδια πάει και κουμπώνει στον αφαλό Ευχαριστώ