Repair Instructions; On-Vehicle Service; Brake Hose (Front) - Daewoo MATIZ Service Manual

4A – 8 HYDRAULIC BRAKES

REPAIR INSTRUCTIONS

ON–VEHICLE SERVICE
D107A528
D17A529B

BRAKE HOSE (FRONT)

Removal Procedure
1. Remove the wheels. Refer to Section 2E, Tires and
Wheels.
2. Remove the brake hose.
D Remove the fitting (1).
D Remove the E–ring retainer (2).
D Disconnect the brake hose mounting from the strut
(3).
D Remove the coupling bolt (4).
D Plug the opening in the brake pipe and caliper to
prevent fluid loss or contamination.
Installation Procedure
1. Connect the brake lines to the brake hose (1).
Tighten
Tighten the brake pipe–to–hose fitting to 16 NSm (12
lb-ft).
2. Install the brake hose coupling bolt (2).
Tighten
Tighten the bolt to 25.5 NSm (19.1 lb-ft).
Important: Use only Daewoo recommended brake
fluid.
3. Bleed the brake system. Refer to "Manual Bleeding
the Brakes" in this section.
4. Check the brake system for leaks.
5. Install the wheels. Refer to Section 2E, Tires and
Wheels.
DAEWOO M-150 BL2