Front End Sealing; Cowl Vent Grille - Daewoo MATIZ Service Manual

9R – 4 BODY FRONT END

FRONT END SEALING

All locations where waterleaks may occur are sealed
during production with high quality, durable sealers. If it
becomes necessary to reseal specific areas, use a high
quality sealer of medium-bodied consistency which will
retain its flexible characteristics after curing and can be
painted if necessary.
D109C520

COWL VENT GRILLE

Removal Procedure
1. Remove the wiper arm assembly. Refer to Section
9D, Wiper/Washer Systems.
2. Remove the cowl vent grille screws and the clips.
D Remove the screws after removing the upper cap
(1).
D Remove the lower retaining plastic clips (2).
D Close the hood.
D Lift up the cowl vent grille (3).
D109C521
3. Remove the cowl vent grille.
D Disconnect the front washer hose connector.
D Remove the cowl vent grille.
a. Cowl vent grille.
b. Front washer hose connector.
D19C522A
Installation Procedure
1. Connect the front washer hose connector.
D19C522A
DAEWOO M-150 BL2