Daewoo MATIZ Service Manual page 984

9E – 10 INSTRUMENTATION/DRIVER INFORMATION
Installation Procedure
1. Install the vents to the instrument cluster trim panel
with the screws.
2. Install the instrument cluster trim panel. Refer to "In-
strument Cluster Trim Panel" in this section.
D109B508
DIGITAL CLOCK
(Left–Hand Drive Shown, Right–Hand
Drive Similar)
Removal Procedure
1. Disconnect the negative battery cable.
2. Pry off the defroster grille.
3. Unlock the locking of the digital clock.
a. Digital clock.
D109B511
4. Remove the digital clock from the instrument panel.
D Disconnect the electrical connector (1).
D Remove the digital clock (2).
D109B512
Installation Procedure
1. Connect the electrical connector.
2. Install the digital clock to the instrument panel.
3. Connect the negative battery cable.
4. Set the clock.
D109B513
DAEWOO M-150 BL2