Daewoo MATIZ Service Manual page 1063

9L – 8 GLASS AND MIRRORS
Installation Procedure
1. Apply tape to the new weatherstrip and the rear win-
dow to hold the weatherstrip in place.
2. Apply adhesive primer to the rear window frame and
the perimeter of the rear window.
D109E511
3. Apply glass adhesive to the rear window frame.
D109E512
4. Install the rear window into the rear window frame.
5. Reposition the tape over the weatherstrip, the rear
window and the rear window frame to hold the rear
window in place.
6. Let the adhesive dry for 24 hours.
7. Remove the tape.
D19E513A
8. Check for waterleaks by pouring water on the rear
window. If a leak is found, dry the window and fill the
area that leaks with adhesive. If the leak persists,
remove the rear window and repeat the entire pro-
cedure.
9. Connect the rear window defogger electrical con-
nector.
10. Connect the negative battery cable.
D19E514A
DAEWOO M-150 BL2