Access The Web Interface For The First Time And Change The Default User - Leica GR10 Operational Manual

Operational Manual (Online Help)

Access the web interface for the first time and change the default user

This section explains using which user account the web interface can be accessed for the first time, how a new user account is
created and how the default user account is deleted.
Step Description
1 When accessing the web interface for the first time the default administrator user account must be used.
2 On the Log in page use user name Admin and password 12345678.
3 Then go to page Receiver Setup / Access Management.
4 Use the Create new user button.
5
Type in a user name and password, confirm the password.
6 In the list box Web interface user level select Administrator.
7 In list box FTP server access choose Read / Write.
8 Use the Save changes button to save all settings.
9 If the password meets the password requirements the new user account will be saved and thus be shown in the
list of configured users.
10 To avoid unauthorized access it is recommended to delete the default user.
11 For this, log out from the web interface and log in now using the new user account.
12 Go to Receiver Setup / Access Management and use the Delete button to delete the default Admin user
account.
13 Confirm the deletion by clicking on the OK button. After this, the default user Admin will have been deleted.
90